Home :: Electrical Specifications

Electrical Specifications

Allen Refrigeration & Equipment, LLC
1866 Shiloh Springs Road
Trotwood, OH 45426
P: 937-223-0240 - F: 937-223-3519
customerservice@allenrefrigeration.com
OH LIC 46312
 
 
 
______________________________________________________________________________________________________________________
 
Electrical Specifications Sheet
For
All 2 and 3 Door Refurbished Freezer Units
 
______________________________________________________________________________________________________________________
 
 
 
 
                                                                                                                                                            
 
 
 
 
                                                                                                                                                                                                                      
 
Thank you for choosing to purchase your refurbished self-contained two door freezer or three door freezer from Allen Refrigeration & Equipment, LLC.  It is our sincere desire that you receive
many years of trouble free service from your refurbished commercial freezer.  We are providing you with this IMPORTANT information to assure that you have the proper electrical requirements
at your location.  If you do not have the receptacle pictured above at your location please consult an electrician.  Do not alter the plug shipped with your units, severe injury, electrocution, fire, death
or equipment failure could result if the plug is altered or changed.
 
Your freezer will come with an L14-20P twist lock plug pictured above, and must be connected to the L14-20R receptacle also pictured above.  We suggest that you have a licensed electrician
verify that you receptacle is correct and properly wired on a dedicated 20 amp circuit.  If you or your electrician have any questions please give us a call.
 
 
 
IF YOUR FREEZER IS NOT INSTALLED AND CONNECTED TO THE PROPER VOLTAGE  YOUR WARRANTY WILL BE VOIDED
 
G = GROUND
W = NEUTRAL
X = 110 VAC
Y = 110 VAC
 
 
Meter readings when power is ON to your receptacle:
 
X-Y = 220 VAC          Y-X = 220 VAC          G-W = 0 VAC
 
X-W = 110 VAC          Y-G = 110 VAC
 
X-G = 110 VAC          Y-W = 110VAC